Super Coupe Club of America >
SC Literature
> Wheel Alignment Specifications for the 1993 SC
submitted by
Steve Schecter
schecter@cox.net
Wheel Specs
Front End:
Camber
0.00° + or - 0.75°
Caster
+5.50° + or - 0.75°
Toe-In inches (total)
+0.075" + 0.126"
Toe-In Degrees (total)
+0.15° + 0.25°
Front Wheel Turning Angle
Full Turn Inside/Outside
20.00°/19.73°
Front Axle Hub Nut Torque
189-254 Lb-Ft
Rear End:
Camber
-0.50° + 0.50°
Toe-In inches (total)
+0.060" + or - 0.126"
Toe-In Degrees (total)
+0.12° + 0.25°
Info Source:
Technical Publication Department Ford Parts and Service Division
Download PDF of this article
Club email: scguys@sccoa.com
www.sccoa.com
Document Last Modified: 07/29/04 03:39 AM
Copyright ©1996 - 2024, Super Coupe Club of America