Activity Stream

Sounds good. Thanks.

It does not have a fan mount built in. I’ll dig it out and get some pics for you.

Very interested for sure. Is that one of the ones that have a fan mount made onto it?

I may be interested if he’s not. Can you shoot me pics? I’m located in NJ as well.

I have one that was made by Ken Wagner. I removed it to upgrade to a front-mount. Let me dig it out and get some pics for you. I could do $200...

Sir, you just taught and an old mechanic a new (probably old) trick. Proof that you learn something new every day. BTW, Portland Engine...

Thanks for the info..

I work in Vancouver (off of 4th Plain) - Let me know if you need any help. I did the engine complete on my 91 SC "Thumper" in the space of 2 months...

LOL, don't hold your breathe. The head gaskets on my '95 SC blew in 2010. The car still sits in the garage in pieces. When I pulled the heads, the...

You should be the first :)

Hi Rich, Do you have any white interior parts?

any shock actuators, and what color was the interior?

If you just want to sanity check a crank prior to having it checked out by a $hop, free-hang it from a coat hanger or bent welding rod and tap it...

Thanks JB351, I guess, I'm asking the wrong ? What I was wanting to know is; would this old crank shaft be salable or should I just take it to the...

I clean up all the grounds, I usually sand the paint of grounds.

I'm gonna do the entire set so I can replace all the gaskets as I go without forgetting some gasket as if I bought them all separately and I found...

A visual inspection should be your first step looking for ridges, wear, marks, ding marks, rust etc followed by checking the rod and main bearing...

Not sure about that issue but if you have not bought them already the head gaskets are on wholesaler clearance at Rock Auto at the moment. I picked...

I wanna keep it I love the car but really can't figure this part out I know I'll do the head gaskets and have the same issue I just don't know what...

All head gasket failures are different, I've blown many in 16 years and not often were they the same. I'd park it and make the repairs or sell as...

hi blown 38....I can easily build another one...........will forward you the information.

If you have another one in you, I'll take one in black.

I've got a 78 f150 carb 302 that I'm gonna rebuild with some mild performance parts and drop it in but for now just trying to keep the 3.8 going...

No gonna eventually go full carb

Windsor motors and the 3.8s do have the same bell housing pattern. My 93 was originally 5.0 car and did the m5r2 swap on it. The accessory drive is...