PLENUM --how to ?

It bolts to the back of the SC. About the only way I've seen to do it is to remove the sc and inlet as one piece. You may be able to remove the cuff between the two pieces of the inlet and only pull one part. you have to remove the top/IC Tube from the SC and the SC belt. there are two bolts on the SC and 3 to the intake. If you have an 89,90 5-spd, or 94-95 you also have to remove the EGR tube (carefully, it will break).
 
major trouble

this seems to be more trouble than its woth :-(, i wonder if the performance gain of a better plenum justifies such work.
 
Back
Top