View Full Version : 91 SC engine freshly rebuilt: $400

Cox Abele
06-30-2008, 02:40 PM
This is a price drop from my last thread. I have a 91 SC engine on a fresh rebuild. The rotating assembly is in, heads, timing cover, oil pan, water pump, harmonic balancer and lower intake are all on. The remaining parts are included but need cleaned before install. I've been working on it, but don't have the money to finish putting it in my fox body.

Includes supercharger, 95% of the sensors, manifolds AND 99+ mustang headers, all of the wiring, eec, fan and anything else I may have around. Alternator, PS pump... This was a complete pull out for reinstall in a 88 LX mustang.

AOD trans can be included at a minimal additional cost. Has stock and 3k converter.

Taking offers, willing to ship although I've never done it. Delievery can be negotiated. Buyer pays shipping.

06-30-2008, 02:53 PM
where are you located?

Cox Abele
06-30-2008, 03:16 PM
Toledo OH 43614

Ronald Wendt
06-30-2008, 04:41 PM
what has been done and replaced?


Cox Abele
06-30-2008, 07:10 PM
its a stock rebuild. The heads were replaced ~5k before I bought the car. There are no calcium deposits or any signs of wear in them. They cleaned up nicely and were not sitting on blown HGs when I bought the doaner car.

The crank was polished and bearings matched to it. Thw block was honed. It has new crank and rod bearings, new rings and a new timing set and tensioner. Of course all gaskets have been replaced in the process. The pistons spec'd great and were cleaned throughly along with the lifters and any other component that was installed back on the block.

06-30-2008, 07:27 PM

where are you located?

Cox Abele
06-30-2008, 09:24 PM
Toledo OH 43614

Toledo Ohio.

07-01-2008, 01:32 AM
I went for a little joy ride tonight, and I think I bent a valve... BADLY! Do you have pictures?

Cox Abele
07-01-2008, 09:31 AM
I do. Looks like your typical run of the mill clean 3.8L engine though. The blower is not bolted on, I just set it there for some pictures. I pulled everything from the exhaust manifolds to the intake box. Pics are in a build thread.


07-01-2008, 06:17 PM
how much for the engine? I have a 91 sc that just blewup looking for a good fix it is a dayly driver

07-01-2008, 06:19 PM
Forgot I am in springfield oh, not that far away

Cox Abele
07-02-2008, 06:07 PM
$400, PM sent

Cox Abele
07-03-2008, 07:05 PM
some pictures. All parts are available. I've just yet to clean them, paint em and bolt em up.