PDA

View Full Version : 60 lbs injectors brand new



scfix92
07-01-2008, 01:56 PM
I have six 60lbs injectors for the sc for 220.00 plus shipping about 10.00 first person who wants just pay up and they will be sent out asap. I also have pics if wanted

Flex
07-01-2008, 02:36 PM
Good price.

Flint
07-01-2008, 02:41 PM
Dibs.
I want pics and part number.

scfix92
07-01-2008, 07:52 PM
http://i297.photobucket.com/albums/mm228/sloth1992/Sc%2060lbs%20injectors/DSC00269.jpg

http://i297.photobucket.com/albums/mm228/sloth1992/Sc%2060lbs%20injectors/DSC00261.jpg

http://i297.photobucket.com/albums/mm228/sloth1992/Sc%2060lbs%20injectors/DSC00262.jpg

http://i297.photobucket.com/albums/mm228/sloth1992/Sc%2060lbs%20injectors/DSC00265.jpg

http://i297.photobucket.com/albums/mm228/sloth1992/Sc%2060lbs%20injectors/DSC00266.jpg

ok here are the numbers they dont show up in any pics NO34 17113738

I dont know what brand they are they have a RP on one side and a W3 on the other side of the neck close to the ignition plug. I never used because I got screwed when I sent my S-blower off for rebuild and porting so I completely gave up on the car, I also learned the potential of the 4.6 and 5.0 and never looked back.

BirdofPrey97
07-01-2008, 10:45 PM
Find out if they are high or low impedance.

scfix92
07-02-2008, 01:26 AM
I dont know they are for our cars computer so I doubt they are low impedance I got these three years ago, and I could care less for an sc now that is why I am letting tham go so cheap if no one wants them they are going on ebay after the 4th. I really am sorry for not knowing the rest I was really dumb when I first started working on sc's and well I never kep up with anything and thats why I dont know anything about them. They where purchased on a group buy through this club. it may have even been 4 years ago. Any way I had purchased these thinking I was gonna go all race, yeah that never happened. I hope that helps I also paid around 350.00 for it I remeber that because it was either injectors or a xbox at the time.

Flint
07-02-2008, 03:16 AM
This is Delphi 50lb high imp. I need 60lb.
Sorry.

scfix92
07-02-2008, 08:34 AM
Well I guess they are 50lbs I either have a really bad memory which is more than likely true or I got screwed again. I really thought they were 60lbs this sucks

scfix92
07-02-2008, 08:39 AM
You know what I am not doing this here I will put these on ebay soon and I will sell them there that way no body gets screwed, I have 100% feedback. I am not gonna sell them here.

thunderkid84
07-02-2008, 05:54 PM
so they are 50#ers but low impedance ?

i've been lookin for 50# injectors too.

scfix92
07-02-2008, 11:35 PM
this is the specs from racetronix they are delphi 50lbs thankyou flint for the info I never even thought to put the number in the yahoo search bar, duh. They are high impedance so I dont know if that will hurt the computer or not ask before you buy. I am probably going to sell these on ebay I dont think I will make any more money, I just dont want anyone thinking I am trying to screw them, especially since I didnt even know the size. If you look the part number up and look at the pics you can tell thats them. They are still for sale though.



Part Number 17113738 (OE # 17104487)
Static Flow Rate: 50.0 lb/hr @ 43.5PSI (300kPa) 525cc/min or 6.4gm/sec
Static Flow Rate: 57.7 lb/hr @ 58.0PSI (400kPa) 606cc/min or 7.4gm/sec
Dynamic Flow Rate 2.5ms pulse width and 10ms repetition rate @ 43.5PSI (300KPa): 1.1 gm/pulse
Dynamic Flow Rate 2.5ms pulse width and 10ms repetition rate @ 58.0PSI (400KPa): 1.3 gm/pulse
Coil Resistance: 12 Ohms / High Impedance / High-Z (No ECM driver modifications required)
Factory Tollerance: +/-5% (actual +/-7%)
Cone Spray Angle - 22.4 degrees - single spray cone. Approximate cone angle for 90% of spray volume
Connector: Minitimer (Bosch EV1)

thunderkid84
07-03-2008, 06:41 AM
i will agree with flint, those are 50# injectors. the 60# ones have a different body. i guess i'll look for them on ebay soon as i need these injectors. :)

BirdofPrey97
07-03-2008, 06:04 PM
They are high impedance


That's what you want on the SC. :)

scfix92
07-03-2008, 06:38 PM
good to know

Flex
07-03-2008, 06:38 PM
i will agree with flint, those are 50# injectors. the 60# ones have a different body. i guess i'll look for them on ebay soon as i need these injectors. :)


Jason,

Then why not just buy them?

thunderkid84
07-03-2008, 07:15 PM
Jason,

Then why not just buy them?

cuz i just spent the $ a 225 pump and a boost and a/f gauge from a guy on here :eek::p

i sent him a PM about them.

thanks Flex