CMac89
Registered User
I have two 3/4" hoses that need to either "Y" or "tee" into a stock upper radiator hose, from the intake manifold I have. I'm not too sure on the ID of the stock radiator hose, but the size of the fitting would need to be 3/4"-3/4"-1 3/8"(?). I've looked all over the place for this type of fitting, and no luck whatsoever.
I would either need to do this, or drill and tap the late model radiator that I have and put some 3/4" NPT-to-hose barb fittings. What is the thickness of the stock radiator? It may be too thin to do this.
If you have an idea then throw it out there.
I would either need to do this, or drill and tap the late model radiator that I have and put some 3/4" NPT-to-hose barb fittings. What is the thickness of the stock radiator? It may be too thin to do this.
If you have an idea then throw it out there.