Parting 89 SC / Performance Parts

[89psychobird]

I am parting out my 89 SC that is on my member page.

These items are going to Ebay soon:

Yellow C&L sampling tube (for 76mm MAF w/ 30 lb. injectors) - $15
Supercharger (rebuilt and mild porting) - $200
Drivers Side Headlight (2 yrs old, like new) - $35
Passengers Side Headlight (2 yrs old, adhesive between lens and housing is discolored but lens looks like new) - $25
VMM (works, was cracked now fixed) - $25

Borla SS Catback Exhaust (no mufflers, no resonator) - SOLD
SC Tensioner (powder coat removed, clear coated) with Magnum Powers Spring and steel Dayco Pulley - SOLD
Jackshaft Tensioner (powder coat removed, clear coated) with Magnum Powers Spring and steel Dayco Pulley - SOLD
76mm C&L MAF - SOLD
Clear Corners - SOLD
ZR Motorsport Fresh Air Induction - SOLD
Magnaflow 2 inch downpipes and high flow cats (O2 bung welded in passenger side) - SOLD
5% overdrive pulley - SOLD
8mm Taylor Spiro Pro ignition wires - SOLD
BHJ Harmonic Damper for 89-93 SC - SOLD
March Aluminum Underdrive Pullies (crank, water pump, alternator) spacer for alt pulley for 94 or 95 included - SOLD

I will ship to the lower 48 states. Shipping is not included in prices. PayPal is preferred payment.

PM me if you are interested in any other parts.

[90MN12]

pm sent. 5 percent pulley

[nanatothesixth]

pm has been sent!

[Roadhawg]

PM sent March Pullies

[S_Mazza]

Can you explain the Borla catback a little better? It has no mufflers? Are the pipes stainless steel, or just the resonator?

[forcefed95]

pm sent for 76 mm C+L MAFS.

[franky_402]

pm sent!!!!

[Flex]

Pics of the ZR motorsports fresh air induction?

[89psychobird]

Borla Catback for 89-93 came with no mufflers, but came with a resonator. Everything is stainless, including the stainless band clamps that will be included. I have never used the Borla resonator, I have a magnaflow that I use. If you really want mufflers you could add them, but it sounds great without them. BTW - This catback is no longer available from Borla. They only have it for the late model gas tank.

[89psychobird]

Flex - check my member page for a pic of the ZR CAI. Let me know if you want closer pics, I can take them.

[90MN12]

Your Paypal Info?

[TSC89]

PM has been sent.

[rzimmerl]

ANy idea on the pipe sizes on the Borla exhaust? If you still have the March underdrives I'll take them.

[89psychobird]

Attached are requested pics I have been able to get so far.

[IkeyM]

PM sent about parts

[1990XR7SC]

BHJ Harmonic Damper for 89-93 SC - $250
SC Tensioner with Magnum Powers Spring and steel Dayco Pulley - $40
Alternator Tensioner with Magnum Powers Spring and steel Dayco Pulley - $40

Sent you 2 pm's on these.

[90MN12]

.....................

[89psychobird]

Sorry guys I had a busy weekend and was out of town for most of it. I pulled more parts and will be taking more pics as requested. My PayPal info will be given tomorrow (when I find it).

[90MN12]

will be waiting for payment info to make payment.

[NH89SC]

How much shipped for the magnaflow down tubes to 03451? and do you have a pic of them? I,m very interested in them.

[Bacondoggy]

I sent you a pm for some parts.

[Douglas Walker]

payment sent for bhj

[Bacondoggy]

still have the borla catback? Do you still have the resonator, or did you sell it?

[TSC89]

Payment sent for ZR.

[89psychobird]

Here are pictures of the SC Tensioner and the Jackshaft Tensioner.

[TSC89]

My stuff arrived yesterday. Well packed and looks good. Thanks Again.

[NH89SC]

How much shipped for the magnaflow down tubes to 03451? and do you have a pic of them? I,m very interested in them.

Haven't heard anything either way on these and was wondering if you still have them?

[89psychobird]

The few items I have let in the original post are going to ebay soon.

[Tom Mack]

I need the wiring harness from the gas tank pump & gauge to the main harness which comes thru the floor just ahead of the tank. It's about 2 feet long. I'm new to this,what does PM me mean?

[markviii_dub]

I'm looking for front and rear sway bars from 89sc. Please let me know if you have them.
Thanks,

TK

[89psychobird]

I need the wiring harness from the gas tank pump & gauge to the main harness which comes thru the floor just ahead of the tank. It's about 2 feet long. I'm new to this,what does PM me mean?

PM is a private message - when you are logged in, at the top right of browser window click on Private Messages. I don't remember, do I need to drop the tank to get this harness?

[89psychobird]

I'm looking for front and rear sway bars from 89sc. Please let me know if you have them.
Thanks,

TK

I don't think I am motivated enough to pull sway bars.

[5o4SHO]

Are you parting the entire car or just the performance parts?

[Tom Mack]

PM is a private message - when you are logged in, at the top right of browser window click on Private Messages. I don't remember, do I need to drop the tank to get this harness?

I Found a harness like I need but thanks for the reply.

[89psychobird]

The car was picked up today for salvage.