Tin-Knocker105
Registered User
I wanted to install a pressure gage under the hood.. Did the search and came up with two part numbers for the gage and an adapter to screw the gage to.
What i could not find info on was how to get from the male schrader valve to the adapter.
so i have the gauge male going into the female of the adapter leaving a male fitting, so do i just need a elbow female/female to connect it up? 45 degrees?
thanks
one more question
the male part of the adapter is it the same size as the schrader valve, and do i need to remove the valve core?
Thanks again
Tony
I have the two items in my cart at Summit but just need info on the elbow.
What i could not find info on was how to get from the male schrader valve to the adapter.
so i have the gauge male going into the female of the adapter leaving a male fitting, so do i just need a elbow female/female to connect it up? 45 degrees?
thanks
one more question
the male part of the adapter is it the same size as the schrader valve, and do i need to remove the valve core?
Thanks again
Tony
I have the two items in my cart at Summit but just need info on the elbow.
Attachments
Last edited: