Transimission Question

You will need to control the unit. A manual valvebody is one option. Other than that if you use the correct bellhousing(case) and converter it will bolt right up to everything. The driveshaft yoke will have to be swapped, or you can put the aod extension housing on it. The neutral safety (mlps) and reverse lights will be other issues that need to be settled as well. The shifter will require the correct lever, but the shifter and cable should work. The case may need a bracket on it to bolt the cable to it. That will be custom fabrication. Or you can use any 94-97 mn-12 or 93-98 fn-10 shifter and cable.
Alan
 
Back
Top