PDA

View Full Version : Performance, misc. NEW and used parts



rzimmerl
07-25-2008, 09:52 PM
Ported 94-95 supercharger inlet plenum. Throttle body is ported for a 75MM throttle body and inlet is port matched to the supercharger. I used this with a BBK 75MM throttle body with no problems. - SOLD

Ported 94-95 exhaust manifolds. NEW studs are installed and the outlets are ported to a full 2" diameter. Pictures are the 2nd and the 3rd picture shows the porting of both manifolds vs. the stock manifold on top. - SOLD

Stock 89-93 exhaust manifolds, no EGR. NEW studs installed. $50
I can port the outlets for an additional $75 to 2".

Thermo Tec ultra 2000 reflective wrap. This is over a half roll which is perfect for wrapping the lower IC tube from the exhaust manifold heat. -SOLD

3 steel tensioner pulleys. Two are for the supercharger or alternator tensioner, one is used and one is brand NEW. The other pulley is for the jackshaft and is slightly used - SOLD

NEW Motorcraft gas cap. $20

ASP underdrives pulleys -SOLD

Like NEW Spinning wheels SC supercharger power pulley (between 5-10%), last picture shown below. - SOLD

1990 Factory shop manual and EVTM - SOLD

All prices plus shipping and 3% Paypal fee. More pictures are available upon request.
All items are OBO.

rzimmerl
07-27-2008, 08:39 PM
bump for best offers its all gonna hit Ebay this week.

Flex
07-28-2008, 02:57 AM
Ryan,

Like NEW Spinning wheels SC power pulley (between 5-10%) $60

Is this a power steering pulley? Any pics?

Are the ASP's aluminum or steel?

rzimmerl
07-28-2008, 05:32 AM
Like NEW Spinning wheels SC power pulley (between 5-10%) $60

its the supercharger pulley, its the last pic in the first post

The ASP's are sold

JNT
07-28-2008, 12:17 PM
Interested in the manifolds. Who did the porting? Do they still have the EGR fitting?

Joe

rzimmerl
07-28-2008, 01:24 PM
I did the porting. The 94-95's have the oulets opened up to 2" (not just the lip but almost 2" up the collector) and polished smooth. The pic shows the 94-95 with the egr fitting on them (the driever side wasn't finished in the pics, it is finished now).

rzimmerl
08-03-2008, 09:19 PM
Bump... ASP underdrives back up for sale. They have an aluminum crank pulley and steel water pump and alternator pulleys.