QuickMustang
Registered User
OK, so I'm almost finished with my engine rebuild and just have a few things left to finish up before i can start the car for the first time since I've owned it. I'm trying to put the power steering pump on and the high pressure hose is hitting the lower IC tube. I can't get the pump to go all the way on. If I disconnect the hose, it goes on perfectly fine. The end of the hose is not straight and is bent almost in a U shape. Is this supposed to be like that or is it something I did while putting the motor in? Does the hose go above the IC tube or below it.
OK, after looking up the part I found this:
http://www.partsamerica.com/product_images/img/pwr/pwr-91840.jpg
Which is what the end of my hose looks like so I don't think it's bent the wrong way. Has anyone else had interference problems with the lower IC tube and the PS pressure hose?
OK, after looking up the part I found this:
http://www.partsamerica.com/product_images/img/pwr/pwr-91840.jpg
Which is what the end of my hose looks like so I don't think it's bent the wrong way. Has anyone else had interference problems with the lower IC tube and the PS pressure hose?