PDA

View Full Version : 31 spline IRS 03 Cobra differential

tydlwavs
09-02-2008, 07:28 PM
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1&item=150289227569&ssPageName=STRK:MESE:IT&ih=005

I can't use it so it's offered up cheap. It does need two steel discs installed before you run it.

Thanks,
Todd
tydlwavs
09-30-2008, 06:27 PM
bump, didn't sell...make me an offer
rhermanstein
10-04-2008, 02:44 PM
So can you use this in the stock SC housing as long as you get the cobra drive shafts? Could you also use the cobra rear housing and drive shafts on a stock SC ? do you have the housing?
Dirtyd0g
10-04-2008, 03:04 PM
I'll give ya $20 for the 28 spline one. I have plenty of steels you can have. The kits have 8 frictions and 8 steels. You either have leftover frictions or leftover steels depending on how you stack them.
Alan
tydlwavs
10-04-2008, 08:03 PM
Dirtydog, the 28 spline is a solid axle unit. I can get it boxed and get you a shipping quote early next week. Let me know if you still want it.

The 31 spline is something that would require 31 spline shafts on the inside. I don't believe you can just drop in the 03 cobra half shafts.
tydlwavs
10-04-2008, 10:43 PM
31 spline SOLD
Dirtyd0g
10-04-2008, 11:09 PM
Dirtydog, the 28 spline is a solid axle unit. I can get it boxed and get you a shipping quote early next week. Let me know if you still want it.

The 31 spline is something that would require 31 spline shafts on the inside. I don't believe you can just drop in the 03 cobra half shafts.

I'll take it, I can machine them for IRS.
Alan
tydlwavs
10-04-2008, 11:13 PM
I'll get back to you once I get it boxed up.
rhermanstein
10-05-2008, 05:35 PM
So can you unbolt and re attach the inner shafts of a cobra drive axle to the outer half a a SC half shaft?

Will the cobra IRS housing bolt into a SC
Dirtyd0g
10-05-2008, 07:52 PM
It takes some machining,but that is possible. I machine Non IRS sidegears to work in IRS cars. Non IRS 28 spline carriers are a dime a dozen because all the mustangs take them out and go 31 spline.
Alan
tydlwavs
10-10-2008, 11:35 AM
Shoot me a shipping address. I didn't have one here for you. I have it boxed, but I might not get it out until Monday/Tuesday if that's ok.
tydlwavs
10-14-2008, 07:24 PM
I need an address for this. It's in the box waiting to go.