New Exhaust Plan

QuickMustang

Registered User
So I'm replacing my full exhaust on my Tbird. I've already installed the 94/95 style ported exhaust manifolds. I had to "modify" my exhaust a little to make it fit the new manifolds. It works, but leaks a little and I was always planning on replacing it anyways. I like my exhaust to be deep, throaty, and loud. I would like to be able to still talk in my car while cruising, but anything beyond that and I'm ok with it. My current plan is to go with 2.25 downtubes off the manifold transitioning into 2.5 Magnaflow cats: http://store.summitracing.com/partdetail.asp?part=MPE-91006CA

Then I'm going to run into a flowmaster muffler as a resonator. It's dual 2.5" inlet to one 3" outlet.

http://store.summitracing.com/partdetail.asp?part=MPE-12198

I'm going to take that 3" pipe and have it as a side exit right in front of the drivers side rear tire.

If this turns out to be too loud, or annoying, I will intall a 93-95 style gas tank later and run the 3" pipe to the back and put some mufflers back there, but for now I think this will work.

So what do you guys think? Do you think this setup will buzz? I'm thinking having the cats and the Magnaflow resonator should stop the buzz but still let it be loud and deep. I'm having my exhaust installed on Monday, 9-15-08, so let me know what you guys think of this setup before that. Oh, and I'll have whatever I go with at the shootout so everyone can hear what I end up with.
 
go on ebay and get some metallic core converters for like 69 a peice....ANd yes it will be way loud..I had that same exact setup BUT with two mufflers (dynomax and it sounded good...With no mufflers it will be loud
 
Would Metallic core converters off of ebay be better than the Magnaflows? The Magnaflows are only $66 apiece...I would think Magnaflows would be better than some generic converter off ebay, but correct me if I'm wrong.
 
Back
Top