Raymondo
Registered User
Hey guys, I have an aggravating problem. Here's the story. My son overheated his '93 SC blowing a headgasket and ruining a head. So tore it down, found no problems but installed rod bearings, new rings, honed the cylinders, new heads and all gaskets. No problems with the Supercharger other than a snout seal leaking which I replaced. Reassembled the engine, it cranked right up and runs strong with the exception of a clacking sound from the driver's side that has a hollow type sound to it. Had a local mechanic look at it and he thought is was a wrist pin, so pulled it back out today, dropped the pan and from my inspection today I cannot find a wrist pin with any play.
So, any help suggestions, ideas, advice, prayers... will be greatly appreciated!
So, any help suggestions, ideas, advice, prayers... will be greatly appreciated!