Supercharger outlet question

Tom Mack

Registered User
Can anyone tell me how to get the large nut that connects to the IC tube off of the outlet? Is the flange screwed on or pressed on? From the two notches on the flange it seems as though it is screwed on.Would heat or cold be the best way to loosen this flange? I want to remove it for modifying the top to enlarge it but want to reuse it again.
 
Yea, it screws on...You shouldn't need heat to remove. They make a tool called a spanner nut wrench... You can normally get it with a screwdriver in a slot and hitting it with a hammer, but it will nick up your spanner nut pretty bad. I used a really big monkey wrench on mine which also nicked it up pretty good.

However, testing has showed that a better flowing SC top doesn't make more power on stock/lightly modded motors..
 
Do a search and there are a few threads on this. I believe you need to go clockwise to loosen it.
 
Back
Top