DIS harness

Douglas Walker

Registered User
On the 89-93 DIS harness were their different size plugs where it ties into the main harness.

I found that my harness's dont mate since the DIS plug is a larger square and the main harness is a flater rectangle? I pulled the harness from different cars.

Anyone run into this.
 
Early DIS is two-plug and sits on the A/C compressor bracket, on the engine.

Later DIS is single-plug and sits over on the passenger side fenderwell.

They don't seem to be compatible.

Is this what you're talking about?
 
not the plugs for the DIS but the plug that ties the DIS harness to the main harness..

heres a picture
 

Attachments

  • 100_1367.jpg
    100_1367.jpg
    404.4 KB · Views: 57
  • 100_1368.jpg
    100_1368.jpg
    399.5 KB · Views: 49
>the plug that ties the DIS harness to the main harness...

Ah yes, sorry - I only know about early for that one...that connector pair, as I'm sure you've found, sits inside a bracket that mounts on the supercharger top (pass. side front corner bolt/stud).

I replaced that harness on my 1990 a few months back and had to source from early donor cars.
 

Attachments

  • DIS_wiring00.jpg
    DIS_wiring00.jpg
    393.2 KB · Views: 57
Last edited:
Back
Top