View Full Version : DIS harness

Douglas Walker
09-26-2008, 11:26 AM
On the 89-93 DIS harness were their different size plugs where it ties into the main harness.

I found that my harness's dont mate since the DIS plug is a larger square and the main harness is a flater rectangle? I pulled the harness from different cars.

Anyone run into this.

09-26-2008, 12:59 PM
Early DIS is two-plug and sits on the A/C compressor bracket, on the engine.

Later DIS is single-plug and sits over on the passenger side fenderwell.

They don't seem to be compatible.

Is this what you're talking about?

Douglas Walker
09-26-2008, 01:27 PM
not the plugs for the DIS but the plug that ties the DIS harness to the main harness..

heres a picture

09-26-2008, 01:37 PM
>the plug that ties the DIS harness to the main harness...

Ah yes, sorry - I only know about early for that one...that connector pair, as I'm sure you've found, sits inside a bracket that mounts on the supercharger top (pass. side front corner bolt/stud).

I replaced that harness on my 1990 a few months back and had to source from early donor cars.