View Full Version : leaking slave cylinder

Ronald Wendt
10-13-2008, 07:19 PM
the leak on my 91 seems to be getting worse.

I have checked all the lines the best I could and see no leaks there.

I pulled the rubber access cover off the side of the bellhousing and I can see that the outer part that moves when the clutch pedal is moved in and out is very oily and dirty. The lines that connect inside the bellhousing are dry. Is there some seal or another on the slave that could have let loose?



10-15-2008, 05:27 PM
Verify that the bleed valve on the slave is tight.