Proper belt for 10% JS to crank

BKB

Registered User
I did a search and nothing. Im running the stock Gaterback 4070425 this belt is 42.5 effective and 43.25 outer. That belt running from crank pulley to the 10% overdrive JS puts this belt at the stop on the idler and is pretty loose. Since is such a short belt i would think .5 shorter belt is all i would need. Looked on Gates site and the catalog is not working. So anyone have a part # or good length to start with.
 
Gaterback and Gates has nothing available 1/2-1'' shorter then 42.5'' , what is another quality belt manufacture?
 
You change the Tensioner pullies yet?

I think if you go to the 76MM Steel tensioner pullies it will tighten the belt up.Do a search cause I forgot the p/n for the steel pullies or go to SCP.

SCP sells them for 3 for 50 or one for 19.95..

You might already have these, I'm just throwing it out there!

Tom
 
Back
Top