Seat motors out of SC

JDC

Registered User
I have a 90 SC how do you seperate the seat motors from the tracts? Or do you, how do you change them out??Thanks, JDC
 
I can't remember for sure, and I think the different years are slightly different also. If you can, I'd recommend just swap the whole track. Taking the motors apart is a pain in the butt. :rolleyes: If you have to take it apart, I think I remember removing the long bolts on three or four corners of each motor, and then there was a pin or rivets that also needed removed before you could actually lift the motors out. Like I said though...I can't remember for sure. :eek:
 
Ive done a swap out before both ways, motor and tracks.
If you can find a good set of tracks clean them up real good they catch alot of crud (especially) french fries and dirt. Its alot less headaches to just change them out than the motors as mentioned above.

S
 
Seat motors

Thanks for the come back. I've got good set of tracks I cleaned them out real good but it did'nt do the trick. I guess I'm going to have to wait for some sales Thanks .JDC
 
Back
Top