PDA

View Full Version : NEW Brake & Suspension Parts



Thomas A
12-27-2008, 06:54 PM
All of these items are new in the box. I bought most of them for my Cougar, but ending up changing my mind or I just haven't got around to installing them.

Front Brakes for 1989-1992 MN12
TRW Reman'd Front Calipers
MotorCraft OE Pads
$60 + Shipping No Cores Required SOLD!
http://www.adenracing.com/Pictures/images/TRW_Calipers1.JPG
http://www.adenracing.com/Pictures/images/TRW_Calipers2.JPG
http://www.adenracing.com/Pictures/images/MotorCraft_Pads1.JPG
http://www.adenracing.com/Pictures/images/MotorCraft_Pads2.JPG

Front Sway Bar End Link 1989-1992 MN12
TRW 18116 with nuts
$25 + Shipping
http://www.adenracing.com/Pictures/images/TRW_Endlink.JPG

Drivers Side Upper Control Arm 1989-1997 MN12
TRW 10763 with hardware
$50 + Shipping SOLD!
http://www.adenracing.com/Pictures/images/TRW_LHUCA.JPG

Rod's Rear IRS Brace 1989-1997 MN12
Never Installed, Includes Hardware
Primed in Gray, ready for paint
$115 + Shipping SOLD!
http://www.adenracing.com/Pictures/images/Rear_Brace.JPG

Thomas

Rodeo Joe
01-01-2009, 01:56 PM
Thomas,

Interested in the upper control arm if it is fact a true TRW piece, not a Moog and Rod's Rear IRS Brace.

Edit: Shipping to 02038.

Joe

nanatothesixth
01-01-2009, 04:48 PM
interested in the front brake set up, sway bar end links, shipped to 14215. thanks! Tom

Thomas A
01-01-2009, 06:24 PM
Thomas,

Interested in the upper control arm if it is fact a true TRW piece, not a Moog and Rod's Rear IRS Brace.

Edit: Shipping to 02038.

Joe
It was bought before Moog purchased TRW. The box is labeled as another company, but it has a TRW part number on it? Total would be $165+$11 Shipping.


interested in the front brake set up, sway bar end links, shipped to 14215. thanks! Tom
There is only 1 end link, it is not a pair. If you don't care about them arriving in the original boxes, I can ship those parts for $10. Otherwise shipping would run $15.

nanatothesixth
01-01-2009, 11:35 PM
i will take the brake parts, not the end link. i don't need the original boxes. thanks! Tom

BirdofPrey97
01-02-2009, 09:56 AM
Thomas,

I need 2 uppers and 1 lower for the SC. Also tie rod ends. If you have any let me know.

Rodeo Joe
01-02-2009, 04:30 PM
It was bought before Moog purchased TRW. The box is labeled as another company, but it has a TRW part number on it? Total would be $165+$11 Shipping.
Thomas,

Thanks for the info. What do you prefer for payment method?

Joe

NEEDaSCbad
01-05-2009, 03:28 AM
pm sent...

Thomas A
01-05-2009, 08:57 PM
Looks like everything is either sold or sold pending payment. I'll update this if anything changes. Thanks guys!

Thomas

jc91sc
01-07-2009, 05:39 AM
Thomas,

Interested in the upper control arm if it is fact a true TRW piece, not a Moog and Rod's Rear IRS Brace.

Edit: Shipping to 02038.

Joe

What's wrong with the Moog stuff...or is that a question for another thread?

James E.

Thomas A
01-07-2009, 04:01 PM
Different thread please.

Thomas

Thomas A
01-10-2009, 07:14 PM
I have 1 sway bar end link left. $30 including shipping to USA.

Front Sway Bar End Link 1989-1992 MN12 TRW 18116 with nuts

http://www.adenracing.com/Pictures/images/TRW_Endlink.JPG

Thomas

Rodeo Joe
01-15-2009, 06:10 PM
Thomas,

Parts arrived today, thank you! :D

Joe