PDA

View Full Version : raised supercharger top



m_eppard
01-04-2009, 10:43 AM
I have installed a raised supercharger top and now have an alinement problem with intercooler tubes. Any one have any tips for this problem. THANKS

kenewagner
01-04-2009, 11:19 AM
I have installed a raised supercharger top and now have an alinement problem with intercooler tubes. Any one have any tips for this problem. THANKS


Loosen the upper tube at the IC and it should twist a little so it angles up a little better to the top.

Ken

Ironsam63
01-04-2009, 11:21 AM
Undo the top and bottom tubes on the intercooler, then put on the top tube to the raised top. Then you should be able to move the intercooler so you can hook up the top and bottom tubes.

David Neibert
01-04-2009, 12:07 PM
I have installed a raised supercharger top and now have an alinement problem with intercooler tubes. Any one have any tips for this problem. THANKS

With the raised top, you will not be able to use the bolt that secures the upper IC tube to the accesory bracket...remove it then do as the others suggest about alignment and tightning.

What are you using to reseal the IC tube ends and the raised top ?

David

CurtisPaulfrey
01-04-2009, 12:56 PM
What are you using to reseal the IC tube ends and the raised top ?


make sure you use the orange RTV....it will say on the package that it is for turbocharged applications

XxSlowpokexX
01-04-2009, 01:48 PM
As David said you can no longer use the tube attachment point..Most likely why its not ligning up