ricardoa1
Registered User
Can anyone give me links or point me in the right direction to buy the special tools needed for a M5R2 overhaul?
The right pliyers for the snap rings, what wrench to use etc.
I plan on swapping all of my later components to another M5R2 box case, also throw in a new 3rd gear syncro in, seems like that particular syncro has taken a beating and has worn twice as fast as the others, even with only about 20k since the last rebuild.
At first I was just going to replace my broken tailshaft housing, but if its not too complicated id like to do the above mentioned. Any tips on the hard to remove parts is appreciated.
The right pliyers for the snap rings, what wrench to use etc.
I plan on swapping all of my later components to another M5R2 box case, also throw in a new 3rd gear syncro in, seems like that particular syncro has taken a beating and has worn twice as fast as the others, even with only about 20k since the last rebuild.
At first I was just going to replace my broken tailshaft housing, but if its not too complicated id like to do the above mentioned. Any tips on the hard to remove parts is appreciated.