got a problem with bleeding the system, pump the pedal and relase the bleeder valve and air comes out once in a while and fluid is coming out as well, but the pedal will not get any stiffer.
the pedal still goes to the bottom of the floor with no pressure
every time the clutch pedal is pressed i hear a air sound from the cluth master cylinder.
i'm thinking maybe the cylinder is bad, since it got moved around quite a bit during motor install and int swap.
anyone have any ideas to try or should i just break down are replace the whole system, minus the slave cylinder.
thanks for any help!
Ryan
sunny627@hotmail.com
the pedal still goes to the bottom of the floor with no pressure
every time the clutch pedal is pressed i hear a air sound from the cluth master cylinder.
i'm thinking maybe the cylinder is bad, since it got moved around quite a bit during motor install and int swap.
anyone have any ideas to try or should i just break down are replace the whole system, minus the slave cylinder.
thanks for any help!
Ryan
sunny627@hotmail.com