PDA

View Full Version : power seats



VINCES
03-17-2009, 04:15 PM
How difficult is it to remove the seats from the track? I was able to get the lower protion of seat detached, but not the frame/backrest.....I see where it bolts on the non-motor side, but the motor side of track looks like a nightmare...

Flip
03-17-2009, 05:13 PM
The back should unbolt from one side and the other side just hooks into the lower frame. Unbolt it and kind of flip it out.

VINCES
03-18-2009, 09:11 AM
does that one spring on the side hold it on that side?

Flip
03-18-2009, 12:21 PM
Hum, I don't remember a spring? Just two bolts on the control side and disconnect the air lines and the other side just unhooks.. Not sure what spring you are talking about.

VINCES
03-18-2009, 12:26 PM
maybe it's for the recline feature?

VINCES
03-19-2009, 08:58 AM
I got it, thanks.....I was afraid the other two bolts were going to mess with the recline mechanism. finally apart, and ~30-35 lbs lighter, plus more compact!!!