Speedo unit replacement

91SCNORCAL

Registered User
I am looking for a how to replace my speedo page I had found one before it was step by step can't seem to locate it now.
 
Thought someone would respond by now.

Anyways, you take the cover off of the steering column (3 screws from the underside). Take the headlight knob off. Take the dash cluster bezel off (2 screws at the top and then gently pry it forwards). Unplug the auto headlamp if equipped and set the whole thing aside.

With a small torx bit, take the screws out around the edge of the clear cover and take the cover off. After that, just carefully pull the speedo unit forward and out. Thats about it.
 
Thought someone would respond by now.

Anyways, you take the cover off of the steering column (3 screws from the underside).

It depends on the year on my 1990 I didnt have to remove anything from the column. Heres a warning when removing the dash bezel do it with care and take your time or else some of the snap in things will break and the bezel wont go on smoothly any more.
 
Back
Top