PDA

View Full Version : Question > Spare Tire cu. ft.



Maic
04-03-2009, 09:02 PM
Does anyone know how much Cubic Feet the area is where the Spare Tire goes ? Thanks!


-Maic

txsc
04-03-2009, 09:48 PM
Pi times the square of the radius (in feet), times the depth (in feet) = cubic feet. Just take a simple diameter and depth measurement with your trusty tape measure, and do the math. That will get you pretty close for most purposes. If you need greater accuracy than that, fill up the tire well with water, then drain it into a graduated container and convert from gallons to cubic feet.

JD

racecougar
04-03-2009, 10:17 PM
From my measurements, roughly 2.8 cu. ft. Working on a sub enclosure?

Maic
04-03-2009, 10:27 PM
From my measurements, roughly 2.8 cu. ft. Working on a sub enclosure?

Thinking about re-Working it! Some Day:D
Thanks for the Rough measurement.

-Maic

racecougar
04-03-2009, 10:36 PM
I just finished up this one for my XR7. It came in right at 1.6 cu. ft.

http://i6.photobucket.com/albums/y207/racecougar/90%20XR7/interior/subs4.jpg

Maic
04-04-2009, 12:04 PM
[QUOTE=racecougar;806227]I just finished up this one for my XR7. It came in right at 1.6 cu. ft.

Clean Job!

-Maic

mikedenton49
04-04-2009, 01:12 PM
Dont suppose any of you guys would want to build one of these for me?