View Full Version : New personal best

05-02-2009, 09:46 PM
Well the MPx was sold and so was the MP 15% OD 10 rib kit this winter to fund the Autorotor. So installed a home ported a 94 blower, MP inlet plenum, 10% SC pulley, 10% JS pulley in its place.

60 ft. 1.85
1/4- 13.148 @103.09

ET was a little quicker, but MPH was down 2. I was amazed when I pulled that number then backed that up with a 13.18. Guess you don't need fancy blowers when your running a stock block.

05-02-2009, 10:06 PM
wow !!

thats all you had done to it ?

05-02-2009, 10:14 PM
See my member page for my other bolt on parts, stock 100K block and stock cam. I also did the blower porting.

05-02-2009, 10:23 PM
i think the only thing u have over me, that really makes power, would be the mp inlet and headers, and 10% more overdrive.

so u ran 20% on just a ported 94 ? what was your boost at ?

05-02-2009, 10:31 PM
Yep its just a plain ported 94 at about 16-18 psi. I just installed the MP inlet and 10% SC pulley on Friday. It was running about 14 psi last week with the stock plenum and 15% OD and felt dog slow. The MP inlet and the extra 5% OD really woke it back up to were I was with the MPx

05-02-2009, 11:56 PM
i have 10% on my ported late model, stock plenum. it pushes 14 psi, 15 on a good night.

how do i know if i could run more od ?

i wonder what kind of inlet temps you're seeing ? ever grab your lower ic pipe after doing a hard run ?

05-03-2009, 08:20 AM
The lower tube is warm, after about 10 mins of cool down you can grab the upper tube without an issue. My AFR stays right at 11.8-12.0, so its running safe.

05-03-2009, 08:26 AM
Yep, I saw the grin on your face! Made some good runs. Shame the track didnt really prep the launch area or there might have been some better numbers.

05-03-2009, 10:45 AM
were u on street tires ryan ?

Scott Long
05-03-2009, 10:56 AM
Yeah I was surprised as hell that he went faster with a home port 94 not even an S port, than he did with an MPX. The MP inlet is a major factor, Jason you need to get your hands on one of those pieces.

I think he was on drag radials.

05-03-2009, 11:08 AM
i know i've been telling you this for months !!

i talked to victor about how long it would take to order one. he replied once but hasnt written back yet. :(

Scott Long
05-03-2009, 11:17 AM
Might be able to get one used? Keep your eyes on the parts for sale board. Or go direct with Charles or Bill E at Super Coupe Performance, maybe Bill can get one sooner?

05-03-2009, 12:26 PM
I was running ET Street Radials at 16lbs.

David Neibert
05-04-2009, 06:10 PM
I was running ET Street Radials at 16lbs.


Those are very impressive numbers for a stock cam and home ported blower. MP inlet plenum is a great part and really made a big improvement on my SC when I had an M90. If you like the MP inlet plenum, your gonna love the AR.


05-04-2009, 07:13 PM

I can't wait for the AR. I was pretty much assured I'd have it for the shootout this year. My refreshed engine is assembled just waiting on a converter and some time off work to get the swap started. I'll probably make one more shot at the track with this setup before swapping engines.