PDA

View Full Version : Where can i find this pin?



Tin-Knocker105
05-07-2009, 02:52 PM
Was going to run the car a bit today. Antilock and brake lights on pedal hard as a rock.
Im using alldata tracking down a the problem but as usual they throw sothing at you out of the blue.

If you look at D1e im supposed to find the ingition switch lock pin (ON)

i figure they are talking about the "run" position is that correct?

cant find it in the ford book either.


Thanks
tony

Tin-Knocker105
05-07-2009, 08:15 PM
I jumped ahead in the trouble shooting and checked out the relay so it s not that.I replaced it with a spare and it was good as well but i put the origionakl one back. I just need help on where to find acess to the ingition switch lock pin. to do the next step and then go from there.

Thanks
tony

S_Mazza
05-07-2009, 08:21 PM
It sounds to me like they are talking about the switched power feed at the ignition switch. (Pretty unclear from the text, however.)

Tin-Knocker105
05-07-2009, 09:01 PM
Everything was explained and simple to check out before this step.
And electricial is my weakness too.
im lookong at a EVTM book trying to find the wire/and what colors it is as it goes thru the firewall so i can probe it.
thanks
tony

Mike8675309
05-07-2009, 09:31 PM
Have you seen the information at this site?:
http://www.35thatr.org/Tips/ABS.htm

Tin-Knocker105
05-08-2009, 12:06 AM
Thanks Mike that seems like a simpler tool to use.
I have to check out the pressure switch now, Looks like a knuckle buster.

Thanks
tony