PDA

View Full Version : heres the kit i bought twinturbo



ironworker
05-23-2009, 10:10 PM
Applications:

UNIVERSAL FIT MOST CARS, IT JUST NEEDS THE TWIN TURBO MANIFOLD

Specifications:

*
Kit Includes:
2X V-BAND T3/T4 Turbo Charger
Piping Kit
2X Oil Feed Line Kit
*
2XOIL DRIAN LINE KIT
Boost Controller
31''X11''X 3 Intercooler
2X Type-S Blow Off Valve
*
OIL CATCH TANK
*
This Turbo Kit Is Basic Turbo Kit, Professional Install only.
*
All items Are Brand New In Box. Will Give Your Car 10%-40% Horsepower Gain, Can Up To MAX 350 HP For This Kit.

*
2X V- BAND T3/T4 Turbo Charger

#
T3/T4 V band Turbocharger w/ Filter!!
#
Turbine Turbocharger
#
Oil cooled only
#
8 blade propeller
#
Compressor Specs :
2.150 Inducer
2.207" or 56.06mm inducer
#
2.567" or 65.20mm Major
#
Compressor .50 A.R.
#
Compressor 57 Trim
#
M24 / T4 Compressor Housing
#
Turbine Specs :
#
T3 Type Turbine
#
2" Exducer
#
2.756" or 70.00mm Major
#
2.131" or 54.14mm Minor
#
Exhaust Outlet Flange with 5 bolt design
#
Comes with internal wastegate set around 8psi.
#
Suggested for 1.6L to 2.5L engine up to 150-400HP

LARGE Intercooler:

*
Size : 31" x11" x 3" With 3' Inch Inlet/Outlet.
*
Low Pressure Drop - Large Cooling Area - Easy Install - Tube And Fin Style Intercooler.
*
PIPING KIT:
*
Made of 6061 Aluminum. 2.5 inch Diameter Piping Kit With High Quality Silicone Couplers And T-Bolt Clamps.
*
The Couplers Will Not Split Easily + The Clamps Will Not Strip Like The Cheap Kind.
*
Strong & Tighter Fitting Use Hair Spray Between The Pipe And Coupler.
*
Mandrel Bend 2.5 Pipe(As Shown As Picture) For High Flow And High Horse Power And Better Turbo Response Power.Some Cutting And Modification Required!
*
2X Type-S Blow Off Value :
*
CNC Billet Aluminum, Dual Stage Handle, High Boost Power,Easy Mount Piping Set Included For Bolt-On.Including Bov Blow Off Value Flange.
*
Fast Fesponse One For Low And High Boost Pressure.
*
Boost Controller:
*
Allows Adjustable Boost PSI Settings, Light Weight Design To Be Mount Under The Hood. Hardware Is Included.
*
Manually Control turbo boost up to 30 PSI.

2X OIL DRAIN LINE KIT:
#
100% brand new. Never been tried or installed.
#
Made of high quality CNC Steel & Aluminum.
#
Durable design, and Improve turbo performance by draining excessive oil, and can recycle oil back to the turbo.
#
Universal Fit to Most Turbo Chargers.

OIL CATCH TANK:
#
Holds up to 750ml of sludge and condensation
#
Bolt-plug drain at the bottom of canister
#
Dimensions: 6.25" x 3.25" x 3.25"
#
Exterior level indicator displays level of sludge inside canister
#
Made from T6061 Aluminum for lightweight and durability.
#
Oil Catch Tanks collect the oil, moisture and gas that cause carbon and sludge build-up in the intake system and engine to keep them clean even under extreme driving conditions.
#
Prolongs engine life and maximizes the performance of your car.

2X OIL FEED LINE KIT:

special designed inlet adapter limits oil flow, effectively prevent blown oil seal caused by excessive oil pressure



-1/8' Adapter NPT male fitting that foes to the block and one-4AN male fitting built on flange. (made out of Grade 7075 Alum).



-36" long stainless steel braided line with 3/8 diameter



-comes with gasket, screws/washer





Additional piping might be required and/or modification might be needed



*
All the parts in the picture, No Instruction. Professional install only.

boooster
05-24-2009, 02:12 AM
ebay china junk?

sinhumane
05-30-2009, 01:18 PM
be an interesting build, bell engineering jsut started manufacturing the shanghai kit for the miata, includes an ebay turbo.

i'm going with a single borg warner gm8 turbo.

be weary of it being oil cooled only. could cook those puppies in a heartbeat.