PDA

View Full Version : 94/95 Intake Plenum for SuperCharger



RoloSC
07-13-2009, 10:02 PM
I need a 94/95 Intake Plenum for an "S" blower. I only need the Plenum as I already have the supercharger.

I also need 4 or at least 2 actuator brackets for the electronic suspension strut/shock housing. Only need the brackets that hold the actuators. If you have 4 actuators I might be interested in those as well.

Rob

bigpoppa822
07-14-2009, 11:09 AM
I have a stock ported 94/95 inlet that I no longer use because I upgraded to the MP unit. Has been ported on the blower inlet side and on the TB side to accept a 75mm throttle body.

Shoot me a PM if you're interested.

Tim Groth
07-15-2009, 07:28 PM
I need a 94/95 Intake Plenum for an "S" blower. I only need the Plenum as I already have the supercharger.

I also need 4 or at least 2 actuator brackets for the electronic suspension strut/shock housing. Only need the brackets that hold the actuators. If you have 4 actuators I might be interested in those as well.

Rob

You sent me a IM on these parts while I was out of town...if you still need them please get in touch with me. I have them ready to go.

-Tim