Wiring diagram

dbd

Registered User
Need a wiring diagram for a 94/95 pusher fan in front of condenser. I am adding a fan to my 90 R134 changeover. The fan has 3 wires so I am assuming it is a two speed. When I power it up I can't really tell a difference in rpm. I would like to use the low speed if I have a choice since it will be running more then usual.

Thanks
dbd
 
The pusher fans are two speed fans but only the low speed is used. Dark Blue is the connection to the low speed windings. Black is the ground. The blue wire runs to the contacts of the pusher fan relay and then on to a 30A fuse in the Power Distribution Box. The pusher fan relay coil is picked up by the PCM. The White with red stripes is the fast speed windings.
 
Back
Top