PDA

View Full Version : ported heads



TwoToneThunder
08-02-2009, 03:11 PM
trying to clear space

i have a set of ported heads with bigger valves installed

slysc did the porting on the heads intake,exhaust have been nicely ported


i will clean them up before i ship

looking for $450 shipped
or
make an offer

dcjrcode1
08-02-2009, 03:39 PM
trying to clear space

i have a set of ported heads with bigger valves installed

slysc did the porting on the heads intake,exhaust have been nicely ported


i will clean them up before i ship

looking for $450 shipped
or
make an offer

what year are the heads specs on valves and springs have they been flow tested any pics any other problems

TwoToneThunder
08-02-2009, 03:51 PM
the heads came off a motor i bought that i had intended to put in my car but now im putting a 347 in it


i wish had more info on them but since i didnt do the work to them i dont have any flow numbers or measurements

it does have aftermarket valve springs on them they are set up currently for a .540 lift cam

the heads are also setup for studded rockers i forgot to mention that in my first post

you will need aftermarket rocker arms for these heads

they came off a 90 sc that ran a 12.2 @108mph last i knew so they flow pretty good

it managed 380 rwhp with the following modifacations

block bored .030
block o-ringed
coy miller crankshaft gurdle
All arp bolts and studs
head porting by Dan Sly
Bigger stainless steel valves
ported intake
85 mm throtle body
80mm mass air
60 lbs injectors
MPx blower
kooks headers
true dual exhaust
electric water pump
aluminum crank pulley
5% jackshaft pulley
5%% blower pulley
Dr. fred cam
1.8 Harland sharp roller rockers

3:73 gear
10 inch 3000 stall converter
Lentech valve body
Trans by northwest transmission
eibach springs in rear with lx shocks

TwoToneThunder
08-02-2009, 03:52 PM
i have pictures in my email account if you want them

TwoToneThunder
08-02-2009, 04:17 PM
for and extra fee i can include a set of roller rockers

dcjrcode1
08-02-2009, 06:22 PM
i have pictures in my email account if you want them

EMAIL to [email protected]

TwoToneThunder
08-02-2009, 07:38 PM
pictures sent

XxSlowpokexX
08-02-2009, 10:33 PM
Sent you a PM

TwoToneThunder
08-02-2009, 11:26 PM
pictures sent to you as well

TwoToneThunder
08-06-2009, 12:01 AM
bump................

TwoToneThunder
08-09-2009, 11:04 PM
sent pictures to 7 people and nobody responds?

superdadsc
09-14-2009, 09:24 AM
Still for sale?

Stephen

92sclikenew
09-14-2009, 04:00 PM
im pretty sure they are !

i looked at these heads in person and they compared to the set of coy miller stage 2's and look close to the same port work. if that helps you out any?

artic94sc
09-14-2009, 06:42 PM
give me some pics bro.. [email protected]

scxr7
09-14-2009, 08:40 PM
what size are the valves?

TwoToneThunder
09-14-2009, 08:52 PM
the heads are sold pending final payment

92sclikenew
09-15-2009, 05:56 PM
the heads are sold pending final payment

that's nice jim didn't know:p