Accessory drive idler / tensioner pully bearings.

mikeceli

Registered User
I,ve done the search w/ negative results.]

1994 SC AT I need the the tensioner pully's for the rear 2 belts. jack shaft/supercharger/tensioner and jackshaft/crank/tensioner

NAPA, O'riely/Kragen and Autozone don't list them.

Anyone know where I can get NEW ones? Are the bearings removeable, so I might buy the bearing at a "bearing house"?
 
BUMP PLEASE TTT

Anyone know where to get the proper pully's ? They are vital to running the engine!
 
They don't make the pulley to replace the smaller supercharger pulley any longer. You have to replace it with a larger size like the lower blower pulley and the accessory drive pulley. The accessory drive pulley is the same as the lower SC tensioner pulley.

That thread links to the member area where there was discussion of a slightly narrower pulley that is still 70mm in diameter, the size of the smaller top SC pulley.

Here is a thread you can access that discusses the pulleys with some part numbers.
http://www.sccoa.com/forums/showthread.php?t=94553&highlight=tensioner+pulley
 
Back
Top