PDA

View Full Version : Update parts list MAKE OFFERS!!!


BRIAN WALTER
08-10-2009, 07:52 PM
All parts are from my 90 XR7 parts car that was dealer serviced since new all its life, original woman owner. Every part is a Ford part! Large items are pickup only or I can deliver within 100 miles for a few bucks more.

Automatic Transmission (130k on rebuild, works fine)
Pass. rear knuckle
Drvr. rear knuckle
Good set of used spark plug wires $10 shipped
Valve covers
Throttle body
Intake plenum
Return plenum
Supercharger (200k)
Jackshaft assembly w/pulleys
Coil pack
Cam sensor (low miles)
Crank sensor
Iac (low miles)
Tps
Map
(6) Pistons
(6) Connecting rods
Block
Timing cover
89-93 Exhaust manifolds (non egr)
Waterpump pulley
Crank pulley
Automatic shift linkage
Automatic kickdown linkage
Throttle cable
Hood release cable
Front calipers $20 shipped for the pair (good cores)
Rear calipers $20 shipped for the pair (good cores)
A/C compressor (replaced 60k miles ago)
Vmm (broken clips, holds tight with tape)
Climate control (manual)
Multi Function (blinker arm) switch
Steering column
Steering column boot
Blower motor
Factory airbox
Battery tray
(2) Interior door handles

My email is importkilla06489@yahoo.com
I am 20 minutes south of Hartford if anyone wants to take a stop by!
Thanks
Brian

Duffy Floyd
08-10-2009, 08:01 PM
Interested in the LCA to strut rod bushings. Do you have both of them for each side?

J dot Miller
08-10-2009, 08:28 PM
I am interested in one drivers side "Seatbelt track/motor if in good shape" $20. Possibly other stuff. I am more than 100 miles away but I used to live up there so I can drive up there the weekend of the 29th. :cool:

If I go I can brings Duffy's parts half way (Allentown). ;)

Macros
08-10-2009, 08:38 PM
Interested in the SC Top, belt tensioners, intercooler, and intercooler tubing. How much with shipping to 44001?

BRIAN WALTER
08-11-2009, 05:30 PM
J-Dot, I will test the motor on my day off (wednesday) and see whats up. To my knowledge it is fine but I would like to double check it.
Macros, I will get a shipping quote and PM you a total price.
Duffy, I sent the bushings out today USPS priority mail.
Thanks again to everyone!
Brian Walter

J dot Miller
08-11-2009, 08:13 PM
J-Dot, I will test the motor on my day off (wednesday) and see whats up. To my knowledge it is fine but I would like to double check it...

Ok, please let me know how the track looks. No tears and etc?

nanatothesixth
08-11-2009, 08:21 PM
e mail sent!

BRIAN WALTER
08-12-2009, 11:01 AM
PM's and email's sent:)

BRIAN WALTER
08-12-2009, 09:31 PM
Also willing to trade stuff for cobra hub swap parts if anyone is interested

1993thunderbird
08-12-2009, 11:42 PM
need a crankshaft dampner

BRIAN WALTER
08-12-2009, 11:59 PM
I will take a look tommowrow evening. I need to pull the shortblock apart still.
Send me an email at: importkilla06489@yahoo.com for pictures
Thanks

BRIAN WALTER
08-13-2009, 05:37 PM
J-dot, I found one of those little rubber mats you were looking for that goes where the cd player usually sits.
Shoot me an email and I can send pics.
THanks

BRIAN WALTER
08-13-2009, 07:55 PM
Will trade parts/cash for:
xr7 1/4 windows (trim must be excellent)
K&N cone filter
cobra hub swap parts
diff rebuild kit (seals, clutches, etc)

BRIAN WALTER
08-17-2009, 05:52 PM
Bump bump bump

jkonstan
08-17-2009, 06:10 PM
Bump bump bump
What condition are both of the Rear calipers ($15/each shipped) in?
Do you have some good condition stock rear rotors for the rear disc brakes?

BRIAN WALTER
08-17-2009, 06:55 PM
I am selling the calipers for $15 each since I did not drive the car enough to determine operating condition. The right rear caliper was replacedwith a brand new one 70k miles ago at the dealership. On a caliper I recently purchased, the core was $40!
The rear rotors I will measure tommowrow afternoon (tuesday), they appear to be in good shape with minor surface rust from sitting without any deep grooves etc. You can email importkilla06489@yahoo.com for pictures
Thanks
Brian

jkonstan
08-19-2009, 07:55 AM
I sent you some email on about getting more info on the brake parts (rear calipers and rear rotors). I could use a decent set of rear brake parts for my 1990 Cougar XR-7 since the brakes froze up from letting the vehicle sit in my garage over the winter. Thus, please take a good look at your brake parts and let me know if they would really be useable or not. Thanks.

I am selling the calipers for $15 each since I did not drive the car enough to determine operating condition. The right rear caliper was replacedwith a brand new one 70k miles ago at the dealership. On a caliper I recently purchased, the core was $40!
The rear rotors I will measure tommowrow afternoon (tuesday), they appear to be in good shape with minor surface rust from sitting without any deep grooves etc. You can email importkilla06489@yahoo.com for pictures
Thanks
Brian

BRIAN WALTER
08-19-2009, 12:56 PM
I sent you an email in good detail about the parts, it's up to you what you want to do with them. Thank you for the interest.

Clutch/Brake pedals
Fuel rail/6 injectors
Tensioners
DIS module
Emergency brake assembly

All shipped out today, thanks to everyone!

BRIAN WALTER
08-20-2009, 10:57 PM
Bump
Calipers and power antenna SOLD