PDA

View Full Version : wheels - brakes - gauges


ndiiorio
08-14-2009, 02:41 PM
4 -SCP 17"x9" R type wheels polished with 4 Falken 255/45ZR17, have about 4000 miles on them - $850 shipped

SCP front brake pkg #2 (13" rotors and 2 piston calipers) and SCP rear brake pkg. (12" rotors and brake pads) they have about 4000 miles on them and pads are already on and rear stock calipers are included as well as stainless lines from calipers. Also comes with all necesary front hardware and hubs to swap from a older to newer if needed (you will need this if you have early style hubs as these will only work on later style, you also need at least 17" rims as the 13" rotor will not fit in a 16") - $850 shipped

Autometer cobalt gauges, i have Speedo, Tach, boost(goes to +30), oil pressure, and water temp and all needed senders. - $350 shipped (i will not seperate)

Grey cloth front seats in good condition and all motors work. small tear in driver bolster - $80

275hptbirdsc
08-14-2009, 03:18 PM
Pics on the gauges please?

TinManSC92
08-14-2009, 03:59 PM
SOLD! money sent for wheels, , and 93 front spindle change over.

ndiiorio
08-14-2009, 04:09 PM
here is a pic of gauges, the panel is not included just the gauges... but i can give you any wiring information you need.