keyless entry

frantic1

Registered User
I would like to change the keyless entry mine has the numbers worn off of it I picked one up at the wreckers was wondering how to change the access codes on it
 
If you have a manual, there may be instructions for resetting the access code and entering a new one. If so, try connecting it as regularly and resetting. If you don't have a manual, instructions for resetting keyless entry can probably be found on the internet, or by another bbs user.
 
found info on changing it on some older threads thanks a bit useless thou still stuck with the old one in it
 
With the info about how to change the code, you should now be able to wire up the new one to the existing wires and use that keypad.. then change the code. If you found the keypad out of a Thunderbird from a similar year, the wiring should be identical.. remove the inner door panel and see if you can find the wiring for the keypad.. it should be visible. You should also be able to get to the mounts for it.
 
Back
Top