PDA

View Full Version : status udate and vids



Toxic281
09-07-2009, 11:41 PM
ok so I used to talk a lot about doing stuff and never delivered, now I actually finish the job then I talk about it.

ok, I bought Tony's 97 tbird with a burnt up trans in the beginning of august. in two weeks I built the trans (6 forward clutches + 7 direct clutches) 39276

and installed my roush stageIII/svo m112 blower. before the 30 day mark I had the car on the dyno and fixed the a/c39277
39278
348 rwhp / 288tq (3rd gear lock) at 5,800 rpm @ 11psi w/modded 94-95 m90 pulley (stock svo is 3.5 in)
Extra rich w/ 13 degrees of max timing & 20% mix of cam2 fuel
288 tq was the max of every run because the converter wasnt locking up in 3rd gear dyno mode in the tune. (380-400+ tq is typical with this blower)

http://www.youtube.com/watch?v=rRYmMzBggLM

seawalkersee
09-08-2009, 12:16 AM
Your link is broken. But it looks really good. But with that PSI, I figured it would have more tq.

SWS

Toxic281
09-08-2009, 01:06 AM
288 tq was the max of every run because the converter wasnt locking up in 3rd gear dyno mode in the tune. (380-400+ tq is typical with this blower


here is another video 20 punch (http://www.youtube.com/watch?v=eJikPCGmKxk)
50 roll (easing into it) (http://www.youtube.com/watch?v=giIZvRlV3bI)
wet road traction (http://www.youtube.com/watch?v=I86plOw5RbQ)

nickleman60
09-08-2009, 07:26 AM
Looks and sounds good John, are you going to take it to the track? A few of us plan on going to Hertford on the 18th.

z90sc
09-08-2009, 04:56 PM
.......well now,ain't you sumpthin'............I wondered where you been and what you've been up to...............looks and sounds good.Now I've got to get my act together and get mine back on the road.........
z

seawalkersee
09-09-2009, 11:34 AM
I saw the post, but I did not think there was 100hp on the table with the converter locked up.

SWS