PDA

View Full Version : Random No Start Problem



CMac89
09-20-2009, 12:16 AM
So I was driving my '94 SC around and went to a gas station to hit the ATM up. Well, I got back into the car and it was barely firing as in maybe a couple of cylinders were firing, but it wouldn't idle. Now it's down to no firing at all.

There are no CEL's, upshift lights, or weird noises coming from anywhere. I pushed the schrader valve in and fuel sprayed out all over the place. I tried unplugging the cam sensor and did that trick. I remember the guy saying he had to change the balancer a couple of times, checked that for wobbling of any sort and it's all good.

The car has always started up and ran well. I does tend to start idling choppy like it has a cam in it and dies sometimes. It never has a problem starting back up or revving.

Anybody have any suggestions as to where I should look next?

KMT
09-20-2009, 01:18 AM
Pulled the codes yet?

Actually, it sounds like it just ran out of gas.

CMac89
09-20-2009, 09:05 AM
I haven't pulled any codes because the CEL isn't on. Would there be codes stored in memory?

There is a half a tank of gas in the car, if that's what you mean.