PDA

View Full Version : Quick Dyno Vid of My SC



bigpoppa822
11-23-2009, 02:17 PM
<object width="425" height="344"><param name="movie" value="http://www.youtube.com/v/9hfw_Jsv7xY&hl=en_US&fs=1&"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/9hfw_Jsv7xY&hl=en_US&fs=1&" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="425" height="344"></embed></object>

Made 247hp and 338tq on a Mustang dyno. Last summer it made 249hp and 361tq on a Dynojet.
Mods since old numbers are MP inlet, 2.73 to 3.27 swap, and downtubes with high flow cats. Was looking for higher numbers even though it was on a Mustang.

The run was done in 4th gear from 2k to 5500ish. The pull took forever, I think it got heatsoaked during the run since it's still the stock IC.

neverfastenough
11-23-2009, 02:34 PM
Might have made a better number doing 3rd gear pulls. Probably would have been safer from detonation also. However 4th is most accurate.

Corey

thunderkid84
11-23-2009, 03:20 PM
nice blower whine :D

bigpoppa822
11-23-2009, 03:34 PM
Might have made a better number doing 3rd gear pulls. Probably would have been safer from detonation also. However 4th is most accurate.

Corey

The other 2 pulls were done in 3rd gear because the guy running the car was like wow that took forever. The numbers on them sucked though because it got heatsoaked.


Also, big ups to Frit for writing me an amazing base chip. The car PARKED itself at 11.7 (which was commanded) all the way through the run.

lee1rbc
11-27-2009, 10:46 AM
You probably lost about 5hp with the gear swap.

ricardoa1
11-27-2009, 11:49 AM
What dyno did you go to?

bigpoppa822
11-28-2009, 12:33 PM
What dyno did you go to?

ESP out in Sterling, I went for a Volvo dyno day that didn't have enough cars to fill the day. It was $75 for awd and $60 for fwd/rwd.