excessive oil in the intake

Pablo94SC

Registered User
Now that I have the Dbl IC out to remove the alternator (that bottom bolt is LONG), I decided it's time I really take a look at fixing this.

Oil is being sucked into the intake tract from the DS valve cover breather tube. This isn't the typical light misting like most of us have. I have oil dripping down into the air filter and even noticed the rotor pack has been stained from the oiling and a little pooling at the bottom of this inlet plenum. So before I bandage this with an inline filter on the DS breather tube, I want to know the cause and fix it.

Vacuum lines are in the right spots and are all new. IC tubing has no boost leaks. PCV has less than 11k miles on it. I have to be missing something simple and any ideas would be of great help. Thanks.
 
You're scaring me Dave. Fraser didn't adjust the timing (that I'm aware of), so I hoping it's neither.
 
Back
Top