View Full Version : Check dis out...

11-29-2009, 03:36 AM

Plug and play.

Made a Y adapter off of two old M+F O2 connectors

Used the heater +12v for backlights
Ground = Ground
Signal wire --> Gauge's signal wire
And I ran one of those little solid vacuum tubes along with the wires for the boost gauge :)


Why? Because I was bored.

11-29-2009, 11:25 PM
Looks like another neat project by Ryan to me.

11-30-2009, 05:52 AM
SO far I've learned....

1's gear runs rich reguardless of how gently I accelerate... unless I just slip the clutch at idle.

above 45mph, there is a fuel shutoff on coast in gear. It's more efficient to stay in 5th until below said speed, and then, pop it out of gear.