k-member ?

do you guys think that the k-member from a 90 sc will fit in a fox body mustang? i am thinking of doing a project over the winter and was wondering if it would. i just think it would be much more easy to do the swap this way then just doing the motor swap.

Um, no. Won't fit.

The engine sway should work fine with the Mustangs factory, and I say should because you didn't list a year or engine that the Mustang has or had.

If its one of the early Fox's with the 3.3 inline six you will have to change the crossmember to one from an I4, V6, or V8. I believe you should be able to use the engine mount brackets from the 3.8 that some Fox's came with.

Good Luck!

sorry it will be going in a 90-93 fox with a v 8 k-member

ugotdrug said:

sorry it will be going in a 90-93 fox with a v 8 k-member

Click to expand...

As far as I know all you should need to bolt that in then is a set of V6 mount brackets.

thanks that is all i need to know. i have a 35th auto that i am going to be striping to do the swap. i am going to use the dash and center console in the fox as well as all the wireing for the dash