spedo question: does anyone know how this goes back together

SuperDad

Registered User
I just replaced the small gears (mileage counter) behind my spedometer. When I was taking the needle off, a little brass peice fell out of the black cap (see picture). It kinda dropped down from under the cap before I pryed it off & I couldn't tell where it came from. It does not really fit under the cap, but I'm pretty sure it goes there. I beleive it's a weight, needed for low speeds, as I drove the car & the spedo only starts moving when I'm going about 25MPH:rolleyes:
 
Last edited:
that is a counterweight, some speedos have em some don't.
You want to fit that in there over 2 small dimples that'll poke thru the holes in the weight.
That should be OPPOSITE the working end of needle.:)
 
Thanks for the reply. I did some more research & found this picture on sc performance. problem fixed.:)
 
Last edited:
Back
Top