View Full Version : WTT for 93+ Spindles and small misc. parts

01-01-2010, 01:10 PM
Looking for 93 and up spindles to do the Mustang hub swap on my 1990. Also need a headlight knob, and the passenger A pillar trim in gray for auto seatbelts.

Everything here is still for sale: http://www.sccoa.com/forums/showthread.php?t=109331

8" IC fan, ported late model inlet, some stock parts. Also have a 3.5" Payton intake for sale, I painted it with "chrome paint" and did a crappy job so it needs to be redone, if you want I'll give you the can of paint free with the intake. Comes with black couplers, and hose clamps.
Pics of intake attached.

I also have a chip with a base tune only for a car with 42# injectors and a 76mm C&L MAF.

02-01-2010, 11:04 PM
I am interested in the 8" IC fan and chip you have. How much are you asking or do you want to swap? I dont really need the chip but I would for sure like the IC fan.

I have everything you listed out of a 95 SC. Please email me at travis@frea.us

I will snap some pics if you would do the same if you are interested.



02-05-2010, 10:45 AM
Is the chip for an auto or 5spd?

02-05-2010, 04:20 PM
Is the chip for an auto or 5spd?

5 speed. It's a simple base tune to work with 42# injectors and the 76mm C&L MAF for my car, which also had a mild cam. It is reprogrammable via a Moates BURN1. Only reason for selling it is I'm going to upgrade to the Quarterhorse. The car made 250rwhp/361tq with the mods on my member's page except no MP inlet, stock downtubes/cats and it was on stock gears.

03-14-2010, 01:34 PM
Bump, still need everything. Headlight knob, 93+ spindles, and pax side a-pillar trim in grey.

Still have 3.5" intake, ported late model plenum, and IC fan for trade. Will take pics if requested.

03-14-2010, 03:01 PM
pm sent!!!!!!