kneedragger25
Registered User
So I have some Accel universal wires for my 90 and I have 1 question When crimping the coil side does the core of the wire need to make the 90 and touch the coil or do I just bend it back and crimp with the wire?
Plug wire question
- Thread starter kneedragger25
- Start date
90turbo1
Registered User
Bend it back up and over insulation, crimp connector over top of the center electrode.
The connector is what makes connection with the coil.
Hope that helps.
Also when you crimp the connector on make sure there is no extra center electrode (not sure if its called that) sticking out from the metal connector, you can make a spark leak that way.
The connector is what makes connection with the coil.
Hope that helps.
Also when you crimp the connector on make sure there is no extra center electrode (not sure if its called that) sticking out from the metal connector, you can make a spark leak that way.