rapper33142
Registered User
how much hp will 42 injectors support . am going to run a 94-95 blower with 10-15% overdrive
it is ported and am getting a mp inlet i have 75mm tb 76mm maf with 42 tube andan auto, about 280-290rwhp, stick about 300rwhp tops.
If the only thing you are doing to the car is that much OD then you won't be close to maxing out 42's
But some things to ponder with that blower.
1. If its not ported, don't bother going over 5% OD on it.... it'll just become a heat pump and timing will be pulled and you'll lose more power than gain.
2. If it is ported PROPERLY, and you still have the stock inlet plenum, then no point going over 10% OD... again, it'll become a heat pump because the stock inlet plenum will not allow enough air into it.
Food for thought.
Fraser