PDA

View Full Version : Power estimates with S-port & minor mods



MustangJake88
02-14-2010, 10:44 AM
This summer I plan on doing a few things to my '89. My plans are...

-75mm TB
-42lb. injectors
-S-port
-C&L MAF
-10% blower overdrive
-Mag resonator w/Flowmaster resonator back exhaust

I already have a cold air intake and the 2nd to last B&M ripper SCP had in stock (had to get that!). What kind of power should I be looking at with these mods? I am only going to go as far as I can on my stock exhaust manifolds before they start restricting my motor. I'm on a tight budget and I just want a little more power. And...swapping over to an S-port, will this require a tune?

92sclikenew
02-14-2010, 10:54 AM
This summer I plan on doing a few things to my '89. My plans are...

-75mm TB
-42lb. injectors
-S-port
-C&L MAF
-10% blower overdrive
-Mag resonator w/Flowmaster resonator back exhaust

I already have a cold air intake and the 2nd to last B&M ripper SCP had in stock (had to get that!). What kind of power should I be looking at with these mods? I am only going to go as far as I can on my stock exhaust manifolds before they start restricting my motor. I'm on a tight budget and I just want a little more power. And...swapping over to an S-port, will this require a tune?


the exhaust manifolds are said to support 400hp ported if you would like yours ported contact me:D

fturner
02-14-2010, 10:55 AM
I'd say about 230 rwhp give or take.

A tune isn't required for the blower, but it should be done for the 42# injectors and C&L MAF to get the most out of them.

Fraser

MustangJake88
02-14-2010, 03:50 PM
the exhaust manifolds are said to support 400hp ported if you would like yours ported contact me:D
Oh hell yeah dude if I can find me an extra set I will def. get ahold of ya :cool:

MustangJake88
02-14-2010, 03:52 PM
I'd say about 230 rwhp give or take.

A tune isn't required for the blower, but it should be done for the 42# injectors and C&L MAF to get the most out of them.

FraserYeah was thinking I should. Dalke is supposed to be in the STL area this spring and my uncle was taking his SC powered notchback Mustang downthere to have it tuned, and he said if I was swapping to S-port I might as well take my car down too.

95_XR7
02-14-2010, 05:04 PM
Yeah was thinking I should. Dalke is supposed to be in the STL area this spring and my uncle was taking his SC powered notchback Mustang downthere to have it tuned, and he said if I was swapping to S-port I might as well take my car down too.

Talking about Dalke being in STL in late May?

-Corey

sinhumane
02-14-2010, 11:16 PM
with a nice cam, you'll be able to take full advantage of that s port. you could easily make over 250 with a cam and upgraded IC to go along with that.