V6Sprout
Registered User
I have a 94-95 style blower case and plenum available. I have a set of uncoated rotors for it as well I can throw in as well. Comes with the snout also, so basically a complete blower setup just not bolted together. Bearings are fine in the case I just removed the old rotors and sold them to my buddy and since got another set of rotors for this blower. My car is permanently off the road so its of no use to me anymore. The inlet plenum has been port matched to the 75mm TB as well.
The TB is a 94-95 Mustang GT BBK 75mm TB. I welded on a bad socket for the SC throttle linkage. Not sure how the cruise hooks up since I didnt run cruise control in my mustang.
The blower case has scratches on the inside of the case, but I made 14-15 psi on it no problems, I ran a 5% OD on the blower.
Looking for $500 US with FREE SHIPPING from Canada to anywhere in the USA or Canada, tracking number provided as well.
Pics available, email me at v6sprout@gmail.com
The TB is a 94-95 Mustang GT BBK 75mm TB. I welded on a bad socket for the SC throttle linkage. Not sure how the cruise hooks up since I didnt run cruise control in my mustang.
The blower case has scratches on the inside of the case, but I made 14-15 psi on it no problems, I ran a 5% OD on the blower.
Looking for $500 US with FREE SHIPPING from Canada to anywhere in the USA or Canada, tracking number provided as well.
Pics available, email me at v6sprout@gmail.com