Pulling motor

SCchick3

Registered User
Getting ready to pull my car out of storage and pull the motor to get it rebuilt. I was wondering if you guys could give me some pointers on what to look into buying and stuff i'm gonna need.

Also, little pointers about things that normally go wrong at about 160k so i can just change it when its out. I plan on redoing all gaskets, the main seal, rebuilding my supercharger and having my heads sent in. If you guys have any good tips I would really appreciate it!!
 
plenty of wd40 and a torch, just tried to change my motor mounts the other day and the bolts holding the starter on were stuck so i couldnt even get to the thing:mad:

some liquid teflon tape to reseal the intercooler tubes and whatnot
 
Back
Top